Specifications - Black & Decker Start-It 90550871 Instruction Manual

90550871 Vec012CBD EN SP.qxp:VEC012CBD_ManualEN_080907

SPECIFICATIONS

Output: 12v dc, 450 amps instant, 5 seconds 300 amps
Battery: 12v, 17Ah, sealed lead-acid
Cables & clamps: Welding type, heavy duty
Compressor: 120 PSI
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must
accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules, These limits are designed to provide reasonable
protection against harmful interference to radio communications. However, there is not
guarantee that interference to radio or television reception, with can be determined by turning
the equipment off and on, user is encouraged to try to connect the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between equipment and receiver.
• Connect equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Imported by
Vector Products Inc.
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.
8/21/09
See 'Tools-Electric'
– Yellow Pages –
for Service & Sales
9
11:04 AM Page 9