Black & Decker Air Station 9528 Instruction Manual

Black & Decker Air Station 9528 Instruction Manual

Advertisement

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Air Station 9528 and is the answer not in the manual?

Questions and answers

Doug Welch
May 19, 2025

My B and D air compressor stopped working. When it is plugged in, it does not come on.

1 comments:
Mr. Anderson
May 23, 2025

If the Black & Decker Air Station 9528 air compressor does not turn on when plugged in, possible issues include:

1. Power Source Problem: The outlet may not be supplying power. Test the outlet with another device to confirm it works.

2. Blown Fuse or Tripped Circuit Breaker: The fuse in the compressor or the circuit breaker in the electrical panel may be blown or tripped. Check and replace the fuse or reset the breaker if needed.

3. Power Cord or Plug Damage: Inspect the power cord and plug for visible damage or wear. A damaged cord can prevent power from reaching the unit.

4. Internal Switch or Motor Issue: The on/off switch or internal motor components may be faulty. If the switch doesn’t click or the motor hums but doesn’t start, internal repair may be needed.

5. Overheat Protection Activated: The compressor may have overheated and triggered an internal thermal overload protector. Allow the unit to cool down before attempting to restart.

6. Loose or Disconnected Wires: Inside the unit, wires may have come loose or disconnected, preventing electrical flow.

If basic troubleshooting does not resolve the issue, the unit may require professional repair or replacement.

This answer is automatically generated

peter m jacobs
February 24, 2025

When I put the universal valve adjuster over the tire and use the lever to lock it down, air still keeps leaking from the tire. The tire holds 35-55 pounds of pressure. I can barely get 15-20 pounds of air in the tire.

1 comments:
Mr. Anderson
February 24, 2025

Air may be leaking from the tire when using the Black & Decker Air Station 9528 universal valve adjuster due to several possible reasons:

1. Improper Connection – The universal valve adjuster may not be securely attached to the tire's valve stem. Ensure it is fully seated and tightened properly.

2. Damaged or Worn Valve Stem – The tire’s valve stem may be worn, cracked, or damaged, causing air to escape. Inspect the valve stem for any visible defects.

3. Faulty Valve Core – The valve core inside the stem may be loose or faulty. Tighten or replace the valve core if necessary.

4. Leaking Valve Adjuster – The universal valve adjuster itself may be defective or have a worn seal, preventing a proper seal with the valve stem.

5. Improper Use – If the adjuster is not aligned correctly or is moved while inflating, air may escape. Keep the adjuster steady during inflation.

6. Excess Pressure on the Valve – Pressing too hard or at an incorrect angle may cause the valve to open improperly, leading to leaks.

To fix the issue, check the connections, inspect the valve stem and core, and ensure the adjuster is correctly positioned. If the problem persists, replacing the valve core or the universal valve adjuster may be necessary.

This answer is automatically generated

Subscribe to Our Youtube Channel

This manual is also suitable for:

Air station 9528sAir station 9528-2Air station ts850

Table of Contents

Save PDF