Cleaning And Care Of The Unit; Disposal; Technical Specifications - Beurer IL 35 Instructions For Use Manual

8. Cleaning and care of the unit

The unit should be cleaned occasionally.
Important
To avoid odours caused by fluff and dust, we recommend regularly cleaning the device as follows:
• The device must be switched off and allowed to cool and the mains plug pulled out before cleaning and
changing the infrared heat lamp.
• Ensure that no water penetrates inside the unit!
• Do not wash the unit in a washing machine!
Clean using a damp cloth, to which you can apply a little detergent if necessary.
• Do not use abrasive detergents and never immerse the unit in water. Do not touch the unit with wet hands
while it is plugged in; do not allow any water to be sprayed onto the unit.
• The unit must be operated only when it is completely dry.

9. Disposal

For environmental reasons, do not dispose of the device in the household waste at the end of its useful life.
Dispose of the unit at a suitable local collection or recycling point. Dispose of the device in accordance
with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If you have any questions, please
contact the local authorities responsible for waste disposal.

10. Technical specifications

Mains connection
Power consumption
Dimensions (W x H x D)
Weight
Operating conditions
Storage and transport
Expected operating life of the device 7 years
Standby consumption
220-230 V~ / 50-60 Hz
150 W
145 x 220 x 175 mm
approx. 800 g
Temperature: +5°C to +35°C; Relative humidity: 15%-93%
Temperature: -25°C to +70°C; Relative humidity: ≤93%
< 0.5 watts
11