Initializing The Speaker - Sony SRS-HG10 Help Manual

Help Guide
Wireless Speaker
h.ear go 2 (SRS-HG10)

Initializing the speaker

With the speaker turned on, press and hold the + (volume) button and the SET UP button at the same time for more than
four seconds.
When speaker receive that operation, the NETWORK indicator, BLUETOOTH indicator, USB indicator, and AUDIO IN
indicator are lit up in white at the same time and initializing starts. It takes about 60 to 80 seconds to initialize. Then,
(power) indicator lights up in green and initializing completes. The BLUETOOTH pairing information and network setting
are deleted after initializing.
Note
If you initialize the speaker, it may not be able to make a BLUETOOTH connection with your iPhone/iPod touch or PC. In this
case, erase the pairing information of the speaker on your iPhone/iPod touch or PC, and then perform the pairing procedure
again.
4-735-503-11(1) Copyright 2018 Sony Corporation
229