Extra Bass Indicator - Sony SRS-HG10 Help Manual

Table of Contents

Advertisement

Lights up (white) The speaker is in the USB mode.
BLUETOOTH indicator
Lights up (white)
Flashes quickly (three times a second) (white) The speaker is pairing with a BLUETOOTH device.
Flashes (once a second) (white)
NETWORK indicator
Lights up (white)
Lights up (green or light blue)
UPDATE indicator
Lights
The speaker detected the availability of a software update while connected to the Internet. After pressing
up
and holding the UPDATE button for 2 seconds while the indicator is lit, the software update starts when the
(orange)
speaker beeps.
The speaker is updating the software. During the update, you cannot operate the speaker.
Flashes
When the speaker turns on for the first time after the software update, the UPDATE button flashes three
(orange)
times to inform you that the update has completed.

EXTRA BASS indicator

Lights up You can enjoy the bass sound effect.
Turns off
The bass sound effect is not activated. This is set as the default.
(right) /
(left) indicators
Lights up or flashes depending on the status of the speaker while the Wireless Surround function, the Wireless Stereo
function, or the Speaker Add function is on.
*1
When checking the Wi-Fi signal strength (reception sensitivity), the indicator is lit while connected to the Wi-Fi network.
*2
When switching the wireless function to on/off, the indicator flashes.
*3
When switching the BLUETOOTH audio streaming playback quality of the speaker, the indicator flashes.
*4
When disabling the Wi-Fi network function and BLUETOOTH network function, the indicator flashes.
*5
If the software updating has failed, the indicator is lit.
Related Topic
Parts and controls
Checking the Wi-Fi signal strength (reception sensitivity)
Updating the pre-installed software
The power indicator flashes in red
Using this speaker as a rear speaker (Wireless Surround)
Connecting two speakers (Wireless Stereo)
Connecting two speakers (Speaker Add function)
*1*2*3*4
*1*2*4
The speaker is in the NETWORK mode.
The speaker is connected to a music service.
*5
The speaker is connected to a BLUETOOTH device.
The speaker is searching for a BLUETOOTH device to connect.
161

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

H.ear go 2

Table of Contents