Making A Call - Sony SRS-HG10 Help Manual

Help Guide
Wireless Speaker
h.ear go 2 (SRS-HG10)

Making a call

You can enjoy hands-free calls with a BLUETOOTH mobile phone that supports the BLUETOOTH profile HFP (Hands-
free Profile).
Operations may vary depending on the mobile phone. Refer to the operating instructions supplied with your mobile
phone.
Make a BLUETOOTH connection with the mobile phone.
1
The BLUETOOTH indicator lights up in white when the BLUETOOTH connection is established.
Operate the mobile phone to make a call.
2
While making a call, playback pauses and the dial tone is heard from the speaker.
When the receiver takes the call, talk into the microphone of the speaker.
If no dial tone is heard from the speaker
The mobile phone may not be connected to the speaker with HFP. Make sure the mobile phone is connected
via BLUETOOTH.
Switch the call device to the speaker by pressing and holding the
about two seconds.
Adjust the volume by pressing the –/+ (volume) buttons on the speaker or the volume control on the mobile
3
phone.
When you press the –/+ (volume) buttons, the
volume adjustment.
(power) indicator flashes once or three times according to the
149
(play) button/ (call) button for