Booster - Miele KM 6639-1 Operating And Installation Instructions

Booster

The cooking zones are equipped with a
TwinBooster.
When activated, the power is boosted
so that large quantities can be heated
up quickly, e.g. when boiling water for
cooking pasta. The boost in power is
active for a maximum of 15 minutes
The Booster function can be used on a
maximum of two cooking zones at the
same time.
If the Booster function is switched on
when
– no power level has been selected,
the cooking zone will revert
automatically to level 9 at the end of
the booster time or if the booster
function is switched off before this.
– a power level has been selected, the
cooking zone will revert automatically
to the power level selected at the end
of the booster time or if the booster
function is switched off before this.
In each case two cooking zones are
linked together in order to provide
sufficient power for the Booster. While
the Booster is in operation some of the
power is taken away from the linked
cooking zone. This has one of the
following effects:
– Auto-heat-up is deactivated.
– The power level will be reduced.
– The linked cooking zone is switched
off.
Activating TwinBooster
Level 1
 Place the pan on the cooking zone
you want to use.
 Select a power level if necessary.
 Touch the B sensor control.
The indicator  for TwinBooster level
1 lights up.
Level 2
 Place the pan on the cooking zone
you want to use.
 Select a power level if necessary.
 Touch the B sensor control twice.
The indicator  for TwinBooster level
2 lights up.
Deactivating TwinBooster
 Touch the B sensor control
repeatedly until the indicators go out.
or
 Set another power level.
Operation
41