Releasing The Wires-X Connection - Yaesu FT3DR Instruction Manual

2
Touch one of [C1] to [C5].
Displays the node and room lists.
Tip On room columns, the number of activities (the number of
nodes connected to each room) appears on the right side.
3
Touch the node or room you want to connect to.
Starts connection.
Tips • Rotate the DIAL to select the node or room you want to
connect, then press PTT to establish a connection.
• If connection is successful, the menu list of the node or
room you are connected to appears.
• If connection is unsuccessful, an error message appears
and the screen returns to the list of nodes and rooms.
Tip
You can list items in order according to the number of activities or access history from [WIRES-X] →
[2 SEARCH SETUP] in setting mode.
z Disconnecting from the node or room
1
Press and hold the [BACK] key.
If disconnection is successful, the screen returns to the local node connection screen.

Releasing the WIRES-X connection

Pressing and holding the [ X ] key for over one second switches the screen to the frequency
display screen, and [ X ] displayed on the left side of the frequency display disappears.
Tip If you did not perform the disconnection operation, the local node and the node or room remain
connected.
17
C1:TOKYO AREA
C2:FISHING
C3:----------------
C4:----------------
C5:----------------
C1:TOKYO AREA
JA1YOE-ROOM-A
JQ1YBG-ND
JA1YOE-ROOM12345 2
JA1YOE-ROOM12345
EMERGENCY
NEWS STATION
LOCAL NEWS
INT NEWS
15