EMX Industries ULT-MVP Instruction Manual

Instruction Manual
The ULT-MVP vehicle loop detector allows for detection of metallic objects entering the field around an
induction loop. This detector automatically adjusts from 12 VDC up to 240 VAC which eliminates
the installer's need to match available power to an appropriately rated vehicle detector.
The ULTRAMETER™ display feature makes set-up easy by displaying the optimum sensitivity setting
required to detect a vehicle positioned near the loop. Ten sensitivity settings allow for fine adjustment
of the detection level. The ULT-MVP provides relay contact outputs indicating vehicle presence and a
second set of relay contact outputs providing auxiliary functions. The second output can be used for
loop fault or pulse on entry/pulse on exit, or the EMX exclusive feature, Detect-on-Stop™ (DOS
The ULT-MVP features
infinite or normal (5 minute) presence. Four frequency settings provide flexibility in preventing crosstalk
in multi-loop applications.
Cautions and Warnings
This product is an accessory or part of a system. Install the ULT-MVP according to
instructions from the gate or door operator manufacturer. Comply with all applicable
codes and safety regulations.
Specifications
Power
Operating Current (Standby/Detect)
Loop Frequency
Loop Inductance
Surge Protection
Presence Relay
Output B Relay
Contact Rating (Resistive Load)
Operating Temperature
Environmental Rating
Connector
Dimensions (L x W x H)
EMX Industries, Inc.
ULT-MVP_Rev2.0_082319
ULT-MVP
™
Multi-Voltage Vehicle Loop Detector
automatic sensitivity
12-60 VDC or 12-240 VAC (48-62 Hz)
25 mA/50 mA
4 settings (low, med-low, med-hi, high)
20-2000 µH (Q factor ≥ 5)
Loop circuitry protected by surge suppressors
SPDT relay contacts (form C)
SPDT relay contact (form C)
2 A @ 30 VDC, 0.5 A @ 125 VAC
-40º to 82ºC (-40º to 180ºF) 0 to 95% relative humidity
IP30
11 pin male connector (JEDEC B11-88)
compatible with DIN rail mount socket or wire harness
73 mm (2.9") x 38 mm (1.2") x 78 mm (3.1")
Tech support: 216-834-0761
technical@emxinc.com
boost (ASB), delay,
TM
fail-safe/fail-secure
1/7
® ).
and