NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
Remove the
computer
cover.
Procedure
1. Place the computer with the side-chassis facing up.
2. Lift and rotate the side-chassis away from the computer.
3. Disconnect the power-button cable from the system board.
4. Press the tabs on the power-button module to release the module from the front panel.
5. Remove the power-button module along with its cable through the slot on the front panel.
Removing the power-button module
computer. After working inside your computer, follow the instructions in
Removing the power-button module
28
After
45