Table of Contents
Advertisement
Mouse operations in monitor windows
About presets
Monitoring in Sequence Mode
To the mouse wheel to zoom
Rotate the mouse wheel in a forward direction while pressing the Ctrl key to
zoom in and rotate the mouse wheel in a backward direction while pressing the
Ctrl key to zoom out.
Use your mouse and your keyboard simultaneously to control certain camera
functions.
Shortcut keys
Ctrl + left click
Ctrl + left click and drag
Ctrl + wheel (forward)
Ctrl + wheel (backward)
The NSR enables you to configure camera settings beforehand and then register
them as presets. For details on registering presets, see "Preset" (page 109) of
"Advanced Configuration."
If you click [V] for preset and then click a preset from the list that appears, the
camera is set in accordance with the settings configured for the preset.
Note
While the list is displayed, you can also select a preset by pressing the number
key indicated on the left side of the preset name and then pressing the Enter key.
Sequence mode is a function for displaying multiple monitor layouts in
sequence during a specified time period.
To use sequence mode, a monitor sequence needs to be registered in advance.
For details on registering monitor sequences, see "Adding a Monitoring
Sequence" (page 149) of "Advanced Configuration."
1
Click [V] for monitor layout selection at the top center of the window and
then click a sequence name from the list that appears.
2
Click [Sequence] at the top center of the window.
Sequential operation begins.
Click [Sequence] again to end the sequence operation.
Operations
Moves so that the selected point becomes
the center.
A red frame appears and the image within
the frame is magnified to fill the window when
the mouse button is released.
Zoom in
Zoom out
Chapter 4 Monitoring Live Images
62
Advertisement
Table of Contents
