Seat PLUS/NAVI SYSTEM Owner's Manual page 54

Setup of voice control ⇒ p age 63.
When you activate voice control, you can choose which text and icons take
on the colour of the different functions:
● Red (RADIO and MEDIA) ⇒ p age 54 and ⇒ p age 54
● Green (PHONE) ⇒ p age 54
● Blue (NAV) ⇒ p age 54
Start and stop the voice control
● To activate the voice control, briefly press the button on the multi-func-
tion steering wheel . It can also be activated with the
MIB.
● When voice control is activated there will be an ascending acoustic sig-
nal and a main command menu will be displayed within the function (the
menu will be displayed if option ⇒ p age 63 is activated in the voice con-
trol setup). The spoken instructions will guide you through the following
"dialogue".
● Pronounce the desired order and follow the instructions of the "dia-
logue". A function can often be activated with different spoken commands.
In case of doubt, try to give a command. Due to the quantity of commands
the system can admit, this manual only includes the most important ones.
● When an action is carried out (e.g. calling a contact), the voice control
automatically deactivates and must be reactivated when needed again.
There are certain commands after which the voice control does not end and
waits with
What do you wish to do now?
● To end voice control manually, keep the  button pressed on the multi-
function steering wheel until you hear the corresponding confirmation (de-
scending sound), or press the  button in the display. You can also briefly
press the VOICE button twice to deactivate voice control. (Voice control is
deactivated in the following ways: by briefly pressing the
Command on the steering wheel twice; or by pressing
on the steering wheel for a few moments, and touching the screen or any
button on the radio).
button in the
VOICE
.
VOICE button or
or Command
VOICE
Help with voice control
The first time you use the voice control, listen to the Help.
● Press the function button .
● Give the "Help" command in the language established in the
, and follow the dialogue instructions.
setup
Operation during the dialogue
While the infotainment system transmits a spoken indication, the display
will show the symbol .
● Briefly press the  button on the multi-function steering wheel to inter-
rupt the spoken indication of the infotainment system and give the next
command.
IMPORTANT: The system will ONLY recognise a command when the  sym-
bol is displayed as "active" on the display or touch screen.
If you make a mistake when giving a command or give an incomplete com-
mand, and it has no effect, you can repeat the command. The symbol 
remains active.
● Briefly press the button  of the multi-function steering wheel to repeat
the command.
Instructions for voice control
For optimum functioning of the voice control, follow these instructions:
● Speak slowly and clearly, as far as possible. The system will not recog-
nise words pronounced unclearly, or words and figures in which syllables
are omitted.
● Telephone numbers must be indicated figure by figure or in blocks of
numbers in units, tens or hundreds.
● Speak at a normal volume, without exaggerated intonation or long pau-
ses.
● Avoid noise from the exterior and nearby (for example, conversations in-
side the vehicle). Close all doors, windows and the sliding roof.
Telephone management (PHONE)
System
53
