Table of Contents
Advertisement
the amount of data stored on your mobile phone. When the loading process
is complete, the data will be available to the infotainment system.
Starting the link from the system
● Make sure the mobile device is active and visible.
● Press the
unit button.
PHONE
● Press the
function button.
Find phone
OR:
● Press the
unit button.
PHONE
● Press the
function button.
Setup
● Press the function button
Select phone
OR:
● Press the
unit button.
PHONE
● Press the
function button.
Setup
● Press the
function button.
Bluetooth setup
● Press the
function button.
Find devices
OR:
● Make the connection from the mobile device itself (ensure that the visi-
bility of the infotainment system in the menu
tive).
The search process can take up to 1 minute. On the screen the system will
dynamically update the names of the bluetooth devices found.
● Select the infotainment system or the mobile phone to which you want
to connect from the list of Bluetooth devices found.
The infotainment system and the mobile phone will now be connected to
each other. In certain circumstances, it is possible that to finish the connec-
tion between the two devices, you must enter additional data in the mobile
phone and infotainment system.
and then
.
Find phone
Phone setup > BT setup
is ac-
● If necessary, confirm the link to the mobile phone.
● Use your mobile phone to enter and confirm your PIN code, as indicated
in the display of the infotainment system.
● OR: Compare the PIN code shown in the display of the infotainment sys-
tem with the PIN code that appears on the mobile phone. If they coincide,
you must confirm it on both devices.
Once the link is complete, the main menu PHONE will be shown.
Linking and connecting mobile telephones
You can link up to 20 mobile telephones to the infotainment system, but
only one mobile phone can be connected as hands-free, and only one de-
vice as BT audio at any time.
When you turn on the infotainment system the connection is automatically
established with the mobile phone that was last connected. If it cannot es-
tablish a connection with that mobile phone, the telephone manager will
automatically try to establish a connection with the next mobile phone that
appears on the list of linked devices.
The working radius of the Bluetooth connection is a maximum of 10 metres.
If this working radius is exceeded, the connection established through Blue-
tooth will be interrupted. The connection is automatically re-established as
soon as this device comes back into the Bluetooth working radius.
If the maximum number of linked devices is reached and you wish to link
another one to the system, it will automatically replace the one that has re-
cently been used the least. If you wish to replace it with another one, the
user must erase it beforehand. To do so:
● Press the unit button
within the telephone context.
Setup
● Press the function button
Bluetooth setup
● Press the function button
My devices
● In the list of devices linked, press the function button
mobile phone to be deleted and then press
Telephone management (PHONE)
.
.
after the
remove
to confirm the process.
Delete
51
Advertisement
Table of Contents
