Sony SAT-A2 Operating Instructions (primary manual) Operating Instructions Manual page 82

82
Appendix: Other Information
Button Operates
DSS
TV
DSS
DSS
TV
Cable
DSS
to
TV
Cable
DSS
TV
DSS
TV
DSS
TV
DSS
TV
Description
Brings up the Custom Guide. If you're already
in a program guide, pressing GUIDE repeatedly
brings up future time slots in the guide.
Switches the input of the TV.
Switches the output of the DSS receiver to TV
(normal TV programs), if you've connected a
TV cable or antenna, or to DSS programs.
DSS: Used to tune to and set stations in the
Jump Loop (DSS). See "Using the Jump Loop
Feature" on page 51 for details. TV, Cable: Tunes
to the last station you were tuned to.
Specifies the station number. DSS: In menus,
selects the menu item with the corresponding
number. Also, in some screens, used to enter
numerical values (such as a spending limit or
passcode).
Toggles through the different displays of on-
screen guides (DSS) or other display (TV). See
"Using the DISPLAY Feature" on page 44 for
details.
When moved forward, back, left, right, and
diagonally, highlights items in the on-screen
displays (program guides, menus, etc.). When
pressed, selects highlighted items. When
pressed during normal DSS-viewing, brings up
the Station Index (unless a message appears).
Clears all on-screen displays, including
program guides, menus, etc. If you press EXIT
before you complete your selections, the
previous selections are restored.
Moves to the next (+) or previous (-) station
during normal viewing. In DSS program guides
and some setup screens, these buttons page
through the on-screen displays.