Connecting The Vcr Mouse - Sony SAT-A2 Operating Instructions (primary manual) Operating Instructions Manual

Digital satellite receiver
Hide thumbs Also See for SAT-A2 Operating Instructions (primary manual):
Table of Contents

Advertisement

Connecting the VCR Mouse

SAT-A2 receiver is pictured, but
connections are identical for SAT-B2.
Manufacturer
Code
Sony*
301, 302, 303
Bell & Howell
343
Daewoo
341
Emerson
316, 317, 318, 319, 320
Fisher
330, 333, 334, 335
General Electric
304, 329
Go-Video
339, 340
Goldstar
332
*Code 301 is the default code for Sony VHS VCRs; for Sony 8mm VCRs, use code 302; for Sony Beta, ED VCRs, use code 303.
If the VCR Mouse doesn't seem to be
working correctly, first check that the
VCR Mouse is positioned directly above
the VCR's IR receiving area. If it's still not
working, try this procedure again using
the other codes listed for your VCR. For
more troubleshooting information, see
page 90.
20
Chapter 3: Connecting Your System
The VCR Mouse works with the DSS receiver's Timer function to
automatically start and stop the recording function of your VCR.
1
Connect the VCR Mouse to the DSS receiver's VCR MOUSE/
CONTROL S OUT jack. Then place the VCR Mouse on top of and
slightly overhanging the front of the VCR. For best results, place
the VCR Mouse directly above the VCR's IR receiving area.
2
Find the three-digit code number for your VCR in the table below.
If more than one code number is listed, use the number listed first
to complete step 3.
Manufacturer
Code
Hitachi
304, 305
JVC
314
Magnavox
308, 309, 310
Mitsubishi
323, 324, 325, 326
NEC
336, 337
Panasonic
306, 307
Philips
310
RCA
305
3
Using the buttons on the VCR Mouse: 1) Press the SET button,
2) Enter the three-digit code number, 3) Press the ENTER button.
4
To check that the code is correct, press the 1 button on the VCR
Mouse. If the VCR turns on and off each time you press 1, the code
number is correct.
To use the VCR Mouse:
1) Set the DSS Timer (page 38), 2) Turn on the VCR and set the VCR's
line input to the DSS receiver, 3) Insert a tape, 4) Turn off the VCR.
Manufacturer
Code
Samsung
313, 321, 322
Scott
312
Sharp
327, 328
Shintom
315
Symphonic
338
Teknica
338, 342
Toshiba
311
Zenith
331

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sat-b2

Table of Contents