Sony SAT-A2 Operating Instructions (primary manual) Operating Instructions Manual page 80

Back Panel (SAT-B2)
Connector
SATELLITE IN
WIDE BAND DATA
CONTROL-S IN/
S-LINK
VCR MOUSE/
CONTROL-S OUT
AUDIO (R)/(L)
OUT
VIDEO OUT
S-VIDEO OUT
CH3/CH4 Switch
VHF/UHF IN
VHF(SAT)/UHF OUT
TEL LINE
AC IN
80
Appendix: Other Information
Description
Connects to the LNB on the satellite antenna.
Allows you to connect your DSS receiver to new technologies
(such as high-definition television), as they are introduced.
Additional accessories may be required.
Allows you to pass on remote control signals to another Sony
infrared-controlled audio or video component.
Allows you to pass on remote control signals to another Sony
infrared-controlled audio or video component. Also used to
connect the Sony VCR Mouse (RM-VM101).
Connects your DSS receiver to the right and left audio inputs of
your audio or video component.
Connects your DSS receiver to your TV or VCR's video input.
Allows you to connect your DSS receiver directly to your TV (if
your TV has S-VIDEO IN).
When you use an RF connection, this setting determines the TV
channel on which programs from the DSS receiver can be viewed.
Allows you to connect your DSS receiver to your normal
(terrestrial) TV or cable TV service.
Connects to your TV or VCR.
Connects your DSS receiver to a telephone jack. This allows you to
order pay-per-view programs.
Connects your DSS receiver to a 120V AC outlet.
Cable Type
Solid Bare Copper
RG-6 Coaxial
(75-ohm/F-type)
Depends on future
applications
(D-sub 15 pin)
Audio mono
miniplug
Audio mono
miniplug
Audio (2)
(RCA-type)
Video
(RCA-type)
S-Video
(4-pin mini DIN)
RG-59 Coaxial
(75-ohm/F-type)
RG-59 Coaxial
(75-ohm/F-type)
Telephone (RJ-11)
AC