Using The Setup Menu; Overview - Sony SAT-A2 Operating Instructions (primary manual) Operating Instructions Manual

Chapter 6

Using the Setup Menu

Overview

Read this chapter to set up your DSS receiver for the first time, check
the antenna's signal strength, or to run a system test to diagnose any
difficulties you may be having with your system.
The Setup Menu includes several options you can use to set up and
troubleshoot your system.
Use the Setup Menu to:
Set up and point your satellite antenna (page 67).
Replace your access card (page 68).
Change the aspect ratio of the DSS receiver to match your TV
screen: standard or widescreen (page 70).
SAT-A2 Only: Change the DSS receiver to receive RF (radio
frequency) remote control signals or IR (infrared) remote control
signals (page 71).
Display a list of programmable codes for other components you
may want to operate using the DSS remote control (page 74).
Run a system test to check the operation of your system, including
the access card, phone line, satellite signal, and tuning (page 75).
Display helpful troubleshooting information (page 76).
Get hints and shortcuts on using your digital satellite system
(page 76).
Chapter 6: Using the Setup Menu
65