Sony SAT-A2 Operating Instructions (primary manual) Operating Instructions Manual page 64

Changing the Default
Data Service
The titles of the data services may be
different, based on the service being
provided.
Setting the Baud Rate
The baud rates displayed may be
different, depending on which data port is
being used.
64
Chapter 5: Using the Options Menu
3
Select one of the following:
To Do This ...
Change the data service for the
current station only
Change the data service for all
stations
Change the baud rate for the DSS
receiver's wide band data port
Use the DEFAULT button to select a default data service for all stations
that provide data services.
To change the data service for all stations:
1
Select DEFAULT from the Data Services screen.
2
Select a default data service.
WIDE BAND DATA
DATA 1 DATA 2
DATA 5 DATA 6
To set the baud rate for the DSS receiver's data port:
1
Select BAUD from the Data Services screen.
2
Select a baud rate for the data port.
WIDE BAND DATA
DATA 1 DATA 2
DATA 5 DATA 6
Do This ...
Select the data service and then
select RETURN.
Select DEFAULT (then see
"Changing the Default Data
Service" below).
Select BAUD (then see "Setting
the Baud Rate" below).
DEFAULT DATA
DATA 3 DATA 4
DATA 1
DATA 2
DATA 7 DATA 8
DATA 3
DATA 4
DATA 5
DATA 6
DATA 3 DATA 4
SET BAUD RATE
2400
DATA 7 DATA 8
4800
9600
19200
RETURN
DEFAULT
BAUD
HELP
RETURN
DEFAULT
BAUD
HELP