Selcall Pre-amble Length Setting
The Selcall pre-amble length can be set between 1 and 10 seconds depending on
how many channels are used in the scan table being used. Allow 500 mS for each
Selcall channel to be scanned plus one second, E.g. to scan 8 Selcall channels:-
500 mS x 8 + 1 sec. = 5 seconds.
Use the Scroll keys to select the Selcall pre-amble length
required (example "5 seconds"):-
BARRETT 2030 HF SSB TRANSCEIVER
When the setting required is selected press the
key
131 of 208