Table of Contents
Advertisement
INSTALLATION AND OPERATION MANUAL, ELECTRIC MODULAR SKILLETS,
3.0 INSTALLATION INSTRUCTIONS
UNPACKING
Immediately after unpacking, check for possible shipping damage. If the tilting braising pan is
found to be damaged, save the packaging material and contact the carrier within 15 days of
delivery.
Before installing, verify that the electrical service agrees with the specifications on the rating
plate located on the left side panel as you face the front of the braising pan. If the supply and
equipment requirements do not agree, contact your dealer or Crown Food Service Equipment
Ltd.
LOCATION
The installation location must allow adequate clearances for servicing and proper operation. A
minimum front clearance of 36" and rear clearance of 4" is required.
INSTALLATION CODES AND STANDARDS
Your Crown Tilting Braising Pan must be installed in accordance with:
1. In Canada, provincial and local codes, or in the absence of local codes, with: C.S.A. C22.1
Canadian Electrical Code, Part 1or in the U.S.A., U.L. 197 Standard.
2. In the U.S.A., state and local codes, or in absence of local codes, National Electrical Code
ANSI/NFPA-70 (latest edition).
3. ANSI NFPA Standard #96, "Vapor Removal from Cooking Equipment," (latest edition),
available from the National Fire Protection Association, Batterymarch Park, Quincy, MA,
U.S.A., 02269.
Part No. 10130R3
MODELS EMTS-30, EMTS-40
, EMTS-60
6
2019-01-16
Advertisement
Table of Contents
