Assa Abloy LSC 001T-1K1CPDP Manual

Assa Abloy LSC 001T-1K1CPDP Manual

Lockwood touch dead latch
Table of Contents

Advertisement

Quick Links

LOCKWOOD TOUCH DEAD LATCH 001T-1K1CPDP
Product ID: LSC 001T1K1CPDP
Overview
The 001Touch™ combines a stylish digital touch screen
keypad with the security of the Lockwood 001 Deadlatch.
simple convenience of using a pin code means your
customers never have to carry keys again!
Included:
Touch keypad
Integrated battery & box cover
New 001 Latch to suit timber doors
2 RFID Cards on Mifare
4 x AA batteries
Complete instruction booklet
RFID Fobs available as an optional extra
Features
Touch screen keypad
Finger Pin or RFID card/tag
4 - 12 digit code
Add and delete individual users
Choice of Ezy Mode and Advanced mode - Program 1 to 40 users
Automatic locking after 5 seconds
Visitor Code valid for 3 - 336 hours
Passage mode for daytime use
Set audible tone on or off
Battery check
Time Out when incorrect code entered 5 times of 3 minutes
Electromechanical Door Locks
Electromechanical Solutions
General Description
For 30 years Lockwood's iconic 001 has been securing homes in Australia. The 001 as
we know it today has now become digital. As with the original product, the 001Touch™
uses the 001 Deadlatch to secure the door internally however, the external cylinder has
been replaced with a stylish digital touch screen keypad. The ability to use a pin code or
key card offers a convenient keyless solution.
Key Features
Touch screen Keypad
The touch screen keypad has no mechanical buttons which means no trace of your
secret pin code.
4-12 Digit pin code
Choose a pin code from 4 – 12 digits, this could be ideal for children or occupants that
loose keys on a regular basis.
Key Cards
The

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LSC 001T-1K1CPDP and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Assa Abloy LSC 001T-1K1CPDP

  • Page 1 LOCKWOOD TOUCH DEAD LATCH 001T-1K1CPDP Product ID: LSC 001T1K1CPDP Overview The 001Touch™ combines a stylish digital touch screen keypad with the security of the Lockwood 001 Deadlatch. simple convenience of using a pin code means your customers never have to carry keys again! Included: Touch keypad ...
  • Page 2: User

    Program up to 20 Key cards into your lock and have the ability to remove them individually. Tested in accordance with AS4145.2-2008 The 001Touch has been tested in accordance with the Australian lock standard. Please refer to website for more information. Secure Mode You have the option to lock the 001Touch with the internal key, the key card and pin number automatically unlocks upon entry.
  • Page 3 1300 LOCK UP (1300 562 587)  lockweb.com.au  New Zealand  +64 9415 7111  assaabloy.co.nz  ASSA ABLOY Australia Pty Limited ABN 90 086 451 907 ©2010 USER GUIDE 001TOUCH Digital Keypad and Deadlatch TOUCH Contents Warnings Introduction Introduction Warnings...
  • Page 4: User

    Quick Guide - Keypad Programming Quick Guide - Keypad Operation Keypad Functions Internal Lock Functions / Battery Replacement Product Definitions EZ Mode Functions EZ Mode - Keypad Programming EZ Mode - Keypad Functions Advanced Mode Functions Advanced Mode - Keypad Programming Advanced Mode - Keypad Functions Emergency Power Supply Troubleshooting...
  • Page 5: User

    lock installation, but can be changed at a later time if required. The Quick Guide includes most of the functions required for initial setup and use, for further instructions please refer to relevant sections. The Quick Guide is for "EZ" mode only, please refer to the other sections in the instructions for "Advanced"...
  • Page 6: User

    Contact Key Card. Enter user PIN Code. Complete your verification with a palm - touch or by pressing key. Touch lock with palm of hand or fingers to activate. Unlock, rotate knob. Unlock, rotate knob. Programming the card key will not effect the user PIN code. Programming the user PIN code will not effect the card key.
  • Page 7: User

    To install batteries, first remove Battery Pack Cover by depressing the buttons on the top and bottom of the case, then gently remove cover. Insert 4 good quality alkaline AA batteries into the Battery pack as shown. 2 in the upper battery compartment and two in the lower battery compartment. Batteries must be new good quality alkaline and not be mixed between new and old.
  • Page 8: User

    internal software, all your settings will remain i.e. user Pin code and Key cards. This can be pushed with a small object i.e. pen. Once pressed you will hear confirmation. This is only ever used in the event your lock malfunctions. Passage Mode: Enabling Passage mode allows continuous entry for non-restricted traffic.
  • Page 9: User

    1 2 3 To Program Keypad with Key Card To Program Keypad with Pin code Press Registration Button. Press Registration Button. After removing the battery cover press the Registration button, you will hear a confirmation tone. Enter desired user PIN code User PIN code Registration Re-press Registration Button.
  • Page 10: User

    New Visitor Code Complete Time Setting(3 ~336 hours) Keypad Functions - EZ Mode 1. Touch screen with hand or fingers to activate. 2. Enter 4-12 digit User PIN code followed by the key. 3. Enter digit ( ) corresponding to the function to be performed followed by the key. 4.
  • Page 11: User

    A 6 digit Master Code can be entered. (Master code and User PIN Code must be different). Register / Change Master Code Complete Complete Complete 01~20 Master Code Registration Continue Delete Code / Card Delete All 21~40 Continue 01~40 6 Digits Continue Complete 1~3 appear through individual lighting ?
  • Page 12: User

    Lock does not respond – door is open and accessible. • The touchscreen will become active when pressed with the palm or fingers in at least 3 areas simultaneously. - Use a larger area of the palm or fingers and verify contact with at least 3 areas (page 5). •...
  • Page 13: Table Of Contents

    Lockwood product caused or contributed to by: (a) improper installation or failure to follow fitting instructions; (b) improper maintenance; c) fair wear and tear; (d) any modification or repair which has not been authorized by ASSA ABLOY; (e) use of substitute or replacement parts or cylinders other than genuine ASSA ABLOY parts or cylinders;...
  • Page 14 installed and subject to no more than fair wear and tear. This Warranty is in addition to and not in substitution for any rights of the purchaser under the Trade Practices Act and state or territory legislation. Advance Mode PIN Code Management Guarantee...

Table of Contents