Projecting A Selected File When The Power Is Turned On- Startup - Sony VPL-CX76 Operating Instructions Manual

Projecting a
Selected File When
the Power is Turned
on
— Startup
When the power is turned on, the selected
picture file is projected for about 30 seconds.
When you want to use the registered picture
file as the startup file, you must register a
picture file as the startup file in the index
screen (see page 22).
When a picture file whose resolution is
larger than XGA (1024×768) is registered, a
startup file may not be displayed correctly.
1
Select "Option" in Memory Stick
Home, then press the ENTER key.
2
Select "Setting", then press the , or
ENTER key.
3
Select "Startup", then press the
ENTER key.
4
Select the item, then press the ENTER
key.
Original : to select the original picture
memorized in the projector. The original
picture cannot be changed.
Custom : to select the picture file
registered in the index screen which is
saved in "Memory Stick"
26
Projecting a Selected File When the Power is Turned on — Startup
Off : when you do not want to set the
startup
Notes
• When you want to use the registered file with
the custom setting, insert the "Memory
Stick" where the registered file is saved in the
projector, then turn on the power.
• You can register one startup file per
"Memory Stick".