Projecting A Selected Picture When The Power Is Turned On - Startup; Registering A Still Picture As The Startup Picture - Sony VPL-HS1 Operating Instructions Manual

3
Press M, m, < or , to select
the picture you want to
protect, and press ENTER.
The Index menu appears.
4
Press M or m to select
"Protect," and press ENTER.
5
Press M or m to select "On" or
"All on," and press ENTER.
On: A picture selected on the Index screen is
protected.
All on: All the pictures in the selected contents
are protected.
The protect mark appears in the Index menu for
the protected picture.
To release protection
Select "Off" or "All off" in step 5.
Selecting "Off" releases the protection for the
selected picture. Selecting "All off" releases the
protection for all the pictures in the selected contents.
30
Projecting a Selected Picture When the Power Is Turned On — Startup
GB
No.: 4/32
Size: 1024x768
File: SPORTS
Date:7/29/2001
14:22
Full Screen
Close
R e c i i p e
Return
f l o u r - - - - 2
s u g a r - - - 1/2
s a l t - - - - - 1/2
b u t t e r - - - 1
Protect
Rotate
Startup
Delete
Projecting a Selected
Picture When the Power
Is Turned On — Startup
When the projector is turned on, the specific still
picture stored in the projector is projected
automatically for about one minute, even if no signal
is input. You can change this still picture to the one
you prefer.
Registering a Still Picture as
the Startup Picture
When you want to use a picture stored in your
"Memory Stick" as the startup picture, register the
picture in the "Memory Stick."
MENU
ENTER RESET
1
Select the contents that
include a desired still picture.
1 page 24)
(1 1 1
2
Press M or m to select "Index,"
and press ENTER.
The index pictures of the selected contents are
displayed.
2-5