Oiling The Cutting Attachments; Handling And Use; Attaching/Changing The Cutter Attachments; Attaching/Changing The Comb Attachments - Silvercrest SHBS 5 A1 Operating Instructions Manual

Oiling the cutting attachments

GB
We recommend that you oil the hair trimmer
ments
♦ To do this, simply apply a couple of drops of blade oil (accessory) between the blades, and
then distribute it evenly.
♦ Wipe off any access oil with a soft cloth. Use only non-corrosive oils such as sewing machine oil.

Handling and use

Attaching/changing the cutter attachments

► Switch off the appliance before attaching or changing the cutter attachments.
There is a risk of personal injury!
♦ Press your thumbs forwards against the cutter attachment to release it from its holder
(see Fig. D). Then remove the cutter attachment from the appliance.
♦ To attach the cutter attachment, insert the lower plug-in tab into the opening on the appliance
(see Fig. E).
♦ Then press the upper part of the cutter attachment onto the appliance until it audibly clicks into
place and is fi rmly seated (see Fig. F).

Attaching/changing the comb attachments

Comb attachment for the hair trimmer attachment
The comb attachment
19 mm/21 mm/23 mm).
♦ Attach the comb attachment
the rear end fi rmly until it clicks into place.
♦ To remove the comb attachment
10
before fi rst use and after cleaning to ensure full mobility.
8
WARNING
has settings for 6 diff erent cut lengths (13 mm/15 mm/17 mm/
11
, beard trimmer
from the front onto the hair trimmer attachment
11
, release the lower end and pull it forwards off the appliance.
11
and precision trimmer attach-
7
and press
SHBS 5 A1