Manual Time Setting; Lc Display; Light; Alarm - Auriol 4-LD4537 Usage And Safety Instructions

o'clock position and stop. The alarm clock will now begin to
receive the DCF 77 radio time signal. If radio time signal
reception is not possible, the time must be set manually.

Manual time setting

If radio time signal reception is not possible, the time can be set
manually:
Press and hold SET for 4 seconds.
•
Press SET briefly to move the hands forward by 1 minute.
•
Press and hold SET to use speed setting.
•
If the SET button is not pressed for 8 or more seconds, the alarm
clock will exit setting mode and the set time will be activated.

LC display

If radio time signal reception is successful, the LC
display will alternate between date, temperature
and seconds every 20 seconds. If radio time signal
reception failed, the temperature will appear
continuously. If the alarm is activated, the bell
symbol will appear.

Light

Press the SNOOZE/LIGHT button on top of the alarm clock to
activate the light briefly.
- 55 -

Alarm

To set the alarm time, turn the alarm setting knob on the backside
of the alarm clock in the direction of the arrow. Move the switch 7
to the "ON" position. If the alarm is activated, the bell symbol will
appear on the LC display. The alarm will sound at the set time and
the alarm frequency will increase 3 times in intervals of 10
seconds. Move the alarm switch 7 to "OFF" to deactivate off the
alarm. If the alarm is not turned off, the alarm signal will continue
to sound for approximately 30 - 45 minutes and will sound again
after 12 hours.

Snooze

Press the SNOOZE/LIGHT button on the top of the alarm clock to
activate the snooze feature. The light will be activated briefly and
the alarm will stop. After 5 minutes, the alarm will restart.

Reset

If the alarm clock malfunctions, the electronics of the alarm clock
can be reset by pressing the recessed RESET button with a
pointed tool (a screw driver for example). The hands of the alarm
clock will move to the 12:00:00 position and the date will be
reset to 1.1.

Cleaning instructions

Clean the alarm clock with a soft, dry and lint-free cloth. A glasses
cleaning cloth is ideal.
- 56 -