The Set Setting Menu - Sony s VPL-CS3 Operating Instructions Manual

The SET SETTING
Menu
The SET SETTING menu is used for
changing the settings of the projector.
SET SETTING
STATUS: ON
INPUT-A: COMPUTER
AUTO INPUT SEL: OFF
LANGUAGE: ENGLISH
POWER SAVING: OFF
Menu Items
STATUS (on-screen display)
Sets up the on-screen display.
ON: Shows all of the on-screen displays.
OFF: Turns off the on-screen displays
except for the menus, a message when
turning off the power, and warning
messages.
INPUT-A
Selects the computer, component or video
GBR signal input from the INPUT A
connector.
Note
If the setting is not correct, "Please check
INPUT-A setting." appears on the screen and
the color of the picture becomes strange or the
picture is not displayed.
AUTO INPUT SEL
When set to ON, the projector detects input
signals in the following order: INPUT-A/
VIDEO/S-VIDEO. It indicates the input
channel when the power is turned on or the
INPUT key is pressed.
INPUT-A
LANGUAGE
Selects the language used in the menu and
on-screen displays. Available languages are:
English, French, German, Italian, Spanish,
Japanese and Chinese.
POWER SAVING
When set to ON, the projector goes into
power saving mode if no signal is input for
10 minutes.

The SET SETTING Menu

27
GB