The Input Setting Menu - Sony s VPL-CS3 Operating Instructions Manual

COLOR SYS (System)
Selects the color system of the input signal.
• AUTO: NTSC , PAL, SECAM and
3.58
NTSC (switched automatically)
4.43
• PAL-M/N: PAL-M/PAL-N and NTSC
(switched automatically)
Normally, set to AUTO. If the picture is
distorted or colorless, select the color system
according to the input signal.
VOLUME
Adjusts the volume. The volume can be
adjusted for each of INPUT A, VIDEO and
S VIDEO input.
The INPUT SETTING
Menu
3.58
The INPUT SETTING menu is used to
adjust the input signal.
Items that cannot be adjusted depending on
the input signal are not displayed in the
menu.
For details on the unadjustable items, see
page 37.
When the video signal is input
INPUT SETTING
SHIFT:
ASPECT:
When the RGB signal is input
INPUT SETTING
DOT PHASE:
SIZE H:
SHIFT:
SCAN CONV:
MENU Items
DOT PHASE
Adjusts the dot phase of the LCD panel and
the signal input from the INPUT A
connector.
Adjust the picture further for finer picture
after the picture is adjusted by pressing the
APA key.
Adjust the picture to where it looks clearest.

The INPUT SETTING Menu

VIDEO
H : 2 0 0 V : 3 0
4 : 3
Memory
N o . 0 1
No.
VIDEO/60
Signal
type
INPUT-A
1 5
8 0 0
H : 2 0 0 V : 3 0
ON
Memory
N o . 1 3
No.
640 480
Signal
type
25
GB