Styling; Cleaning - Silvercrest SHGBP 58 B2 Operating Instructions Manual

__291954_Haar-Glaettungsbuerste_B8.book Seite 17 Freitag, 12. Januar 2018 12:01 12
5.2

Styling

The right temperature
WARNING!
Hair can be damaged by excessive
temperature, excessively long contact
or too frequent straightening. Particular-
ly at higher temperatures, you should
not treat the same strand of hair more
than once.
Hair texture
bleached, dyed
blonde
fine, dyed
normal to strong, not
chemically treated
• Start with the lowest temperature that is
recommended for the hair texture to be
treated.
• Increase the temperature in small steps
if the straightening process is taking too
long.
Ionisation function
When the device is switched on, briefly
press the on/off 4 button once to switch
the ion function on or off.
The display 2 shows
tivated. After the function has been switched
on, ions are continuously applied to the hair.
This reduces the static loading of the hair
and improves its stylability.
The hair becomes soft, smooth, glossy, and
easier to style.
Straightening
1. Dry your hair.
2. Comb the hair well.
3. Press the on/off button
4. Start with the lowest temperature that is
5. Separate one strand and brush it
6. Straighten all of your hair in this way,
Recommended
temperature
7. Switch the device off using the on/off
100 - 120 °C
8. Disconnect the mains plug 6 from the
120 - 140 °C
9. Allow the hair to briefly cool before you
140 - 200 °C

6. Cleaning

WARNING! Risk of material damage!
if the function is ac-
•
•
prox. 2 seconds to switch the device
on. The display 2 shows 160.
recommended for the hair texture to be
treated (see table).
smooth. Brush evenly from the hairline
to the tips of the hair. Do not stay in any
one spot for too long. Ensure that you
keep a sufficient distance from your
scalp!
strand by strand.
button 4, and allow the device to
cool down.
wall socket.
treat it further e.g. with styling or care
products.
DANGER! Risk of electric shock!
Pull out the mains plug 6 from the wall
socket before cleaning the hair straight-
ening brush.
Allow the device to cool down before
cleaning.
Do not use any astringent or abrasive
cleaning agents.
Hairs that are tangled in the bristles
should ideally be pulled off using your
fingers.
Clean the device regularly. Wipe down
the housing of the device with a damp
cloth.
4 for ap-
17
GB