Epson ® PowerLite ® Quick Setup Unpack the projector You should have the following items: Power cord Computer cable Projector Projector Password protect remote control sticker Carrying case User’s Guide CD-ROM...
Page 2
The projector has 3 video connectors, as shown below. Each one requires a different type of cable. A computer cable is included. You can purchase optional video cables through Epson or at local electronics stores. You can connect up to 3 video devices and use the remote control to switch among them.
Choosing a location The projector supports 4 viewing setups. Choose the best one for your environment. If you install the projector in a rear or overhead position, you’ll need to choose the correct projection option, identified below, from the Extended menu. See the User’s Guide on your CD-ROM for instructions.
Power light turns orange. When the power light is a steady orange, unplug the projector. With Epson’s exclusive Instant Off™ technology there’s no cool- down period, so you can pack up and go immmediately after turning off the projector. Caution: Never unplug the projector when the flashing orange.
Adjust the image To raise the image, press the foot adjust button and lift the front of the projector. Release the button to lock the foot in the position you want. Rotate the focus ring to sharpen the image. Focus ring Rotate the zoom ring to reduce or enlarge the image.
Select VGA Display or Color LCD, click Arrangement or Arrange, and click Mirror Displays. Epson is a registered trademark and Instant Off is a trademark of Seiko Epson Corporation. PowerLite and PrivateLine are registered trademarks and Epson Store is a service mark of Epson America, Inc.
Need help?
Do you have a question about the PowerLite 76c and is the answer not in the manual?
Questions and answers