Bissell 9200 SERIES User Manual page 20

T
roubleshooting (Continued)
Cleaner not picking up solution
Possible Causes
1. Ready Tools dial may be at wrong setting.
2. 2-in-1 water tank may not be seated properly.
3. 2-in-1 water tank may not be assembled properly.
4. Formula or 2-in-1 water tank is empty.
5. 2-in-1 water tank has picked up
maximum dirty water and red float
door has closed.
6. Red float "door" in the tank may have closed
as a result of bumping an object or moving
machine back and forth too quickly.
20
w w w . b i s s e l l . c o m
ug310-5880_9200E_406.indd 20 ug310-5880_9200E_406.indd 20
Remedies
1. Set Ready Tools dial to either
floor cleaning or hose
attachments setting.
2. Pick up both the 2-in-1 water
tank and formula tank and
reseat them so they fit snugly on
the unit.
3. Check to make sure the "lip" of
the nozzle is securely hooked
into the groove on bottom of
2-in-1 water tank (see page 9).
4. Check water levels in heavy duty
bladder and formula tank.
5. Empty 2-in-1 water tank. Refill
heavy duty bladder with clean
hand hot tap water and replace.
6. Turn the machine OFF ( O ),
allowing red float door to release into
the open position. Turn unit back
ON ( I ) to continue cleaning. Be
sure your forward and backward
strokes are done at a slower pace.
6/9/06 4:25:47 PM 6/9/06 4:25:47 PM