Brush Removal And Large Belt Replacement Instructions - Bissell 9200 SERIES User Manual

B
rush Removal and Large Belt Replacement Instructions
Brushes can be removed for cleaning or
replacement as needed.
1.
Follow Small Belt Removal Instructions on page 17.
2.
Remove brush rolls by pulling them off of the
metal rods.
3.
Place cleaned or new brush rolls back onto the rods.
Make sure one washer is on each end of the rollers
prior to sliding onto the rod. Be sure to let the rod
slide through the bushing to insure proper fit.
4.
Re-attach the long belt on the bottom to the cogs
of the small roller brushes.
5.
Place small belt over back roller and metal cog.
6.
Place pivot arm in place and screw in place using
the silver screw.
7.
Re-attach clear end cap by tightening with the (2)
black screws.
8.
Return nozzle to front of unit, by latching from
underneath and then securing with a screw.
If you have any questions or are having trouble
installing or replacing your belt(s) or brushes,
please call BISSELL Consumer Services in the
UK at 0870.225.0109, in Australia at 1.800.811.183
or in New Zealand at 0800.247.735.
For all other countries call our U.S. A.
Headquarters at 616.453.4451 or visit the
BISSELL Website: www.bissell.com
18
w w w . b i s s e l l . c o m
ug310-5880_9200E_406.indd 18 ug310-5880_9200E_406.indd 18
WARNING:
To reduce the risk of fire,
electric shock or injury,
unplug from the outlet
before servicing.
2 3
4 5
6 7
8
6/9/06 4:25:46 PM 6/9/06 4:25:46 PM