Table of Contents
Advertisement
Level 1
• While watching the TV, you can press the
• One minute before the projection TV switches itself into standby mode, the time remaining is displayed on the TV screen automatically.
Even if you have selected "On" or "Off" in the "Auto Format" option, you can always modify the
format of the screen by pressing
formats:
Smart:
Imitation of wide screen effect for 4:3 broadcast.
4:3:
Conventional 4:3 picture size, full picture information.
14:9:
Compromise between 4:3 and 16:9 picture size.
Zoom:
Widescreen format for letterbox movies.
Wide:
For 16:9 broadcast. Full picture information.
In "Smart", "Zoom" and "14:9" modes, parts of the top and bottom of the screen are cut off.
Press
or
to adjust the position of the image on the screen (e.g. to read subtitles).
If you select "AUTO", the output signal will always be the same one that is displayed on the screen.
If you have connected a decoder to the Scart
the "AV3 Output" to "AUTO" or "TV" for correct unscrambling.
Level 2
button on the remote control to display the time remaining.
repeatedly on the remote control to select one of the following
3/
S
Level 3 / Function
SLEEP TIMER
The "Sleep Timer" option in the "Features" menu allows you to
select a time period for the TV to switch itself automatically into the
standby mode.
To do this: after selecting the option press
set the time period delay (max. of 4 hours).
AUTO FORMAT
The "Auto Format" option in the "Features" menu allows you to
automatically change the aspect ratio of the screen.
To do this: after selecting the option, press
select On (if you wish the TV set to automatically switch the screen
format according to the broadcast signal) or Off (if you wish to keep
your preference). Finally press OK to store.
AV3 OUTPUT
The "AV3 Output" option in the "Features" menu allows you to
select the source to be output from the Scart connector
so that you can record from this Scart any signal coming from the
projection TV or from an external equipment connected to the Scart
connectors
1/
1 or
4 and
4.
If your VCR supports Smartlink, this procedure is not
necessary.
To do this: after selecting the option, press
select the desired output signal: TV, AV1, AV2, AV4, YC4 or
AUTO.
3 or to a VCR connected to this Scart, please remember to change back
, then press
. Then press
2/
2 or side connectors
. Then press
continued...
Menu System
or
to
or
to
GB
3/
3
S
4 or
S
or
to
13
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
