Connecting A Digital Tv Receiver With Component Connectors - Sony KF-42WE620 Operating Instructions Manual

Connecting a Digital TV Receiver with Component Connectors

Digital TV receiver
Disconnect all power sources before making any connections.
z
Be sure to read the digital TV receiver's manual.
1
Using three separate component video cables, connect the digital TV
receiver's Y, P and P
B
DVD IN 5 or 6 inputs.
✍
The Y, P and P
B
be connected to provide sound.
✍
Component video connection is necessary to view 480i, 480p, 720p,
and 1080i formats. For 480i signal, you may also use the S VIDEO or
composite video connections, however, component video (Y, P
will provide the best picture quality for all format types.
2
Using audio cables, connect the digital TV receiver's AUDIO OUT
jacks to the LCD projection TV's AUDIO/VIDEO IN jacks (HD/DVD
IN 5 or 6).
Component
video cable
(not supplied)
Audio cable (not supplied)
✍
You cannot record the signal from any equipment connected into the
Y, P and P connectors.
B R
✍
This LCD projection TV is not compatible with digital TV receivers
configured with RGB or VGA output connectors.
Installing and Connecting the LCD Projection TV
jacks to the LCD projection TV. Use the HD/
R
jacks do not provide audio, so audio cables must
R
Y
P
B
Rear of LCD projection TV
P
R
AUDIO-R AUDIO-L
(red) (white)
, P )
B R
43