01COV.book Page 28 Tuesday, July 30, 2002 3:46 PM
Installing and Connecting the Projection TV
Connecting a Digital TV Receiver
Be sure to read the
Set-top box manual.
Some Digital TV
Receivers are equipped
with a DVI connection.
Refer to your Digital TV
Receiver manual for
setup instructions using
Digital TV Set-top box
Model name1[KP-46WT500] Model name2[KP-51WS500] Model name3[KP-57WS500] Model name4[KP-65WS500]
Disconnect all power sources before making any connections.
Using three separate component video cables, connect the Digital TV
Set-top box's Y, P
The Y, P
jacks do not provide audio, so audio cables must
be connected to provide sound.
Component video connection is necessary to view 480p, 720p, and
1080i formats. You may also use the S VIDEO or Composite Video
connections, however, component video (Y, P
best picture quality for all format types.
Using an audio cable, connect the Digital TV Set-top box's Audio OUT
jacks to the projection TV's AUDIO IN jacks.
VMC-10HG (not supplied)
RK-74A (not supplied)
You cannot record the signal from any equipment connected into the
This projection TV is not compatible with digital TV receivers
configured with RGB or VGA output connectors.
The DVI connection is compliant with the EIA-861 standard and is
not intended for use with personal computers.
jacks to the projection TV.
Rear of projection TV
) will provide the