Cleaning And Care - Silvercrest SHN 3.7 B1 Operating Instructions Manual

3) Press the On/Off switch 6 . The pumice attachment 3/0 starts to turn .
Press the speed switch 5 to choose between a high and low rotation speed .
4) Applying light pressure, move the appliance slowly over the hard skin that
you want to remove . Move the appliance in different directions . During
the treatment, do not linger in one particular place . The friction can cause
unpleasant heat .
5) Once you have completed the treatment, push the On/Off switch 6 .
6) Remove any skin residue and dust from the pumice attachment 3/0 and
the hand element using the supplied cleaning brush r .
NOTE
► After the treatment, massage the skin with a skincare cream .

Cleaning and care

RISK OF ELECTRIC SHOCK
► Before cleaning the charger e, disconnect the mains adapter t .
CAUTION – PROPERTY DAMAGE
► Do not use chemical, aggressive or abrasive cleaning agents . These can
damage the surface of the appliance .
► Never immerse the charger e or mains adapter t in water or other liquids .
♦ Clean the appliance, especially the pumice attachments 3/0, with the
cleaning brush r after every use .
♦ Clean the appliance and the pumice attachments 3/0 with a moist cloth .
Afterwards, dry the appliance with a clean, dry cloth .
♦ For hygienic reasons, we recommend cleaning the attachments with a clean
cloth or brush moistened with a disinfectant after every use . Afterwards, dry
the appliance with a clean, dry cloth .
♦ Clean the charger e with a damp cloth . Afterwards, dry it with a clean,
dry cloth . Ensure that the charger e is completely dry before using the
appliance again .
SHN 3.7 B1
GB │ IE │ NI │ CY │ 11 ■