Safety Instructions - Silvercrest SHN 3.7 B1 Operating Instructions Manual

Safety instructions

RISK OF ELECTRIC SHOCK
Connect the appliance only to mains power sockets supplying a
►
mains power voltage of 100 - 240 V ~ , 50/60 Hz .
The power cable on this appliance cannot be replaced .
►
If the cable is damaged, the whole appliance must be
scrapped .
In the event of a malfunction and before cleaning, disconnect
►
the plug from the mains power socket .
Always pull on the plug to disconnect the appliance from
►
the mains; never pull on the power cable itself .
Do not kink or crush the power cable, and route the cable
►
so that it cannot be stepped on or tripped over .
Make sure that the power cable does not become wet or
►
moist during use . Route the cable in such a way that it can-
not be crushed or damaged .
To prevent risks, stop using the appliance immediately if it
►
is damaged .
Do not use the mains adapter outside .
Do not wrap the power cable around the appliance, and
►
protect it from being damaged .
Never touch the power cable or power plug with wet hands .
►
ATTENTION! Keep the charger, power cable and adapter dry .
►
■ 6 │ GB │ IE │ NI │ CY
SHN 3.7 B1