Processing Times - Silvercrest SSZ 500 A1 Operating Instructions And Safety Instructions

2. Turn the smoothie mixing container (8) around and place it on
the motor unit (2). As you do so, note that the three transparent
lugs on the smoothie mixing container (8) fit into the relevant
gaps on the motor unit (2).
3. To switch on the Smoothie Maker, gently twist the smoothie
mixing container (8) clockwise.
Warning!
Note the short-time duty (KB time). See the technical specifications on page 4.
4. To switch off the Smoothie Maker, gently twist the smoothie mixing container (8) anticlockwise.
Risk of injury
The cutting blades (9) continue to turn immediately after being switched off. Wait for the
cutting blades (9) to come to a complete standstill before removing the smoothie mixing
container (8), opening the smoothie mixing container (8) or taking other steps.
5. Once you have finished preparation, unplug the mains plug from the mains socket.
6. Remove the smoothie mixing container (8) from the motor unit (2).
7. Turn the smoothie mixing container (8) around so that the cutting blades (9) are at the top and
unscrew the cutting blades (9) from the smoothie mixing container (8) (twist them anticlockwise).
You can then either pour out the contents of the smoothie mixing container (8) or screw the lid (10) onto
the smoothie mixing container (8). The lid (10) converts the smoothie mixing container (8) into a handy
drinking bottle for out and about.
8. Clean the lid (10), cutting blades (9) and smoothie mixing container (8). For more on this, please
refer to the "Maintenance/cleaning" section on page 18.

8.1.3 Processing times

The processing times for preparing smoothies, yoghurt drinks and milkshakes depend on your personal
preferences and the nature of the ingredients. If you use, for example, lots of milk and not much fruit, it
SilverCrest SSZ 500 A1
English - 13