Operation; Power Switch; Handle Positions - Bissell Versus 76T8 SERIES User Manual

O
peration
Transporting your cleaner
Place unit in upright position and tip back to roll
on rear wheels.

Power switch

Power switch is located just below handle on left
side of dirt container. Push switch "ON" (I) to vac-
uum, and "OFF" (0) when cleaning is complete.

Handle positions

1. Upright – For storage and above floor
cleaning with crevice tool.
2. Normal cleaning – Lightly press foot of
vacuum and pull handle back to detent.
How to use your bare floor vacuum
The bare floor vacuum is a quick and easy way
to clean your bare floors and low pile carpets.
1. Lightly press foot of vacuum and pull handle
back to detent.
2. Turn power switch to ON (I) position.
3. Clean along edges, in corners, and around
tables and chairs by lining unit up along
surface you want to clean.
4. When finished cleaning, turn power switch
to OFF (0) position.
5. To properly store, return handle to upright
position.
6
w w w . b i s s e l l . c o m
ug110-4060_76T8_608.indd 6 ug110-4060_76T8_608.indd 6
Power Switch
8 0 0 . 2 3 7 . 7 6 9 1
6/18/08 3:43:58 PM 6/18/08 3:43:58 PM