Operation - Bissell 5200 Series User Manual

O
peration
1.
Remove the Clean Tank from the machine.
2. Unscrew the black cap on the bottom of the
solution tank and remove the insert.
3. Filling the Clean Tank:
Fill with BISSELL 2X formula to the formula
fill line and fill with water to the Water Line.
Replace the Cap & Insert Assembly. Place
the full tank back into the unit.
Inserting the Gentle Clean™ brush or pad
1. The first time you use your unit, the Gentle
Clean™ Pad will be in the unit. Based on
your flooring type and personal
preference, you may want to change
to the Gentle Clean™ Brush. To change
pad or brush, pull out sideways.
Dry vaccuming
1.
With the Dry Side of the unit facing forward,
turn the unit on and begin cleaning.
2. You will see dry dirt, crumbs and debris
being collected in the Dirty Tank. You do
not have to empty the dry debris before wet
cleaning.
Flipping from dry to wet cleaning
1.
To change from dry vacuuming to wet clean-
ing simply flip the unit around!
2. The Gentle Clean™ Brush or Pad and
Squeegee will automatically be lowered to
effectively clean and Dry all your Hard Floor
Surfaces.
6
w w w . b i s s e l l . c o m
1.
3.
1.
1.
1.
2.
Tip:
When using a
Dry Gentle Clean™
pad, you may
want to get it
slightly damp by
squeezing the
trigger to saturate
the pad. this will
aid in the flow of
water and formula
to clean sticky
grime and spots.
Tip:
Use only specially
formulated
BiSSEll Hard
Floor and Wood
Floor Solutions
formula.
Non-BiSSEll
cleaning formulas
may harm the
machine and void
the warranty.
Tip:
to extend the life
of your filter and
to maintain
maximum dry
suction, check the
filter for lint and
debris frequently
8 0 0 . 2 3 7 . 7 6 9 1