Honda Click 125i 2019 Owner's Manual page 41

#
Changing the Answer Back Buzzer
Sound Pattern
You can select 3 buzzer sound patterns.
Turn the ignition switch to the
!a
Repeat this step 3 times as follows:
!b
Turn the ignition switch from the
position to the (On) position and press
ANSWER BACK button on remote transmitter
3 times.
Then turn the ignition switch from the (On)
position to the (Off) position within 5 seconds.
You need to operate this process from the
u
(Off) position to the (On) position
within 5 seconds.
(On)
ANSWER BACK
button
(Off) position.
(Off)
LED
(Off)
Turn and keep the ignition switch to the (On)
!c
position. Press the ANSWER BACK button to
select among 3 buzzer sound patterns.
Turn the ignition switch to the
!d
position to finish setting the buzzer sound
patterns.
To complete your setting, you need to go
through step 3 within 60 seconds.
Make sure that LED on the remote transmitter
is green before setting the buzzer sound
patterns. Because if it is red, you cannot set
the buzzer sound patterns.
(Off)
continued 37