Honda Click 125i 2019 Owner's Manual page 40

Answer Back System
#
Adjusting the Answer Back Buzzer
Sound Volume Level
You can select 3 buzzer sound volume levels
or mute.
Turn the ignition switch to the
!a
Repeat this step 3 times as follows:
!b
Turn the ignition switch from the
position to the (On) position and press
ANSWER BACK button on remote transmitter
2 times.
Then turn the ignition switch from the (On)
position to the
You need to operate this process from the
u
(Off) position to the (On) position
within 5 seconds.
(On)
ANSWER BACK
button
36
(Continued)
(Off) position.
(Off)
(Off) position within 5 seconds.
LED
(Off)
Turn and keep the ignition switch to the (On)
!c
position. Press the ANSWER BACK button to
select among 3 levels of sound volume or
mute.
Turn the ignition switch to the
!d
position to finish setting the buzzer sound
volume level.
To complete your setting, you need to go
through step 3 within 60 seconds.
Make sure that LED on the remote transmitter
is green before setting the buzzer sound
volume level. Because if it is red, you cannot
set the buzzer sound volume level.
(Off)