For Environmental Protection And Recycling Of Materials - Panasonic ES-LL41 Operating Instructions Manual

For environmental protection and
recycling of materials
This shaver contains a Lithium-ion battery.
Please make sure that the battery is disposed of at an
officially assigned location, if there is one in your country.
Disposal of Old Equipment and Batteries
Only for European Union and countries with recycling
systems
These symbols on the products, packaging,
and/or accompanying documents mean that
used electrical and electronic products and
batteries must not be mixed with general
household waste.
For proper treatment, recovery and recycling
of old products and used batteries, please
take them to applicable collection points in
accordance with your national legislation.
By disposing of them correctly, you will help
to save valuable resources and prevent any
potential negative effects on human health
and the environment.
For more information about collection and
recycling, please contact your local
municipality.
Penalties may be applicable for incorrect
disposal of this waste, in accordance with
national legislation.
Note for the battery symbol
(bottom symbol)
This symbol might be used in combination
with a chemical symbol. In this case it
complies with the requirement set by the
Directive for the chemical involved.
22
ES‑LL21 .indb 22
Disposal of the built-in rechargeable battery
Remove the built-in rechargeable battery before
disposing of the shaver.
The battery must be disposed of safely.
Please make sure that the battery is disposed of at an
officially designated location if there is one.
This figure must only be used when disposing of the shaver,
and must not be used to repair it. If you dismantle the shaver
yourself, it will no longer be waterproof, which may cause it to
malfunction.
• Remove the shaver from the AC adaptor.
• Press the power switch to turn on the power and then keep
the power on until the battery is completely discharged.
• Perform steps 1 to 7 and lift the battery, and then remove it.
• Take care not to short circuit the positive and negative
terminals of the removed battery, and insulate the terminals
by applying tape to them.







2018/6/19 11:47:50