Table of Contents
Advertisement
Trimming
Corresponding position of trimming height lever
height (mm)
(approx.)
1 mm
2 mm
1 2 3
1 mm
3 mm
5 mm
6 mm
5 6 7
7 mm
5 mm
4. Turn the shaver on, bring the
comb of the comb attachment
into contact with the skin, and
cut the beard by moving the
trimmer.
16
ES‑LL21
.indb 16
and trimming height mark
1 2 3
1 2 3
2 mm
3 mm
5 6 7
5 6 7
6 mm
7 mm
Notes
• Be careful not to cut your hand on the blade when attaching
and removing the comb attachment.
• Hair trimmings may collect inside the comb attachment when
a large volume of beard is cut, so discard hair trimmings
after each use.
• If the comb attachment is not attached properly, it may
become loose during use resulting in excessive cutting.
• Sometimes the beard may be longer than the set trimming
length.
• If the beard is too long, the trimming result may be affected.
Please cut your beard to about 2 cm in length before using
the trimmer.
Cleaning the shaver
We recommend cleaning the shaver after each use.
Cleaning with water
• Turn the shaver off and disconnect the AC adaptor.
1. Apply some hand soap and
some water to the system
outer foil [
].
A
2
2018/6/19 11:47:43
Hide quick links:
Advertisement
Table of Contents
