Parts Identification; Preparation - Panasonic ES-LL41 Operating Instructions Manual

Parts identification

A Main body
1 Protective cap
2 System outer foil
3 Foil frame
4 Power switch
5 Lamp display
a. Shaving sensor
lamp ( )
b. Battery capacity
lamp ( )
c. Switch lock lamp ( )
d. Charge status lamp
( )
6 Appliance socket
7 Foil frame release
buttons
8 Outer foil section
9 Inner blades
 Trimmer
 Trimmer handle
 System outer foil
release buttons
12
ES‑LL21 .indb 12
B AC adaptor (RE7-87)
 Adaptor
 Power plug
 Appliance plug
 Cord
C Length adjustment
comb attachment
(1~3 mm)
ES-LL41
 Comb attachment
release buttons
D
Length adjustment
comb attachment
(5~7 mm)
ES-LL41
 Comb attachment
release buttons
Accessories
E Cleaning brush
F Oil
G Operating Instructions
H Guarantee Card

Preparation

Charging the shaver
• Turn the shaver off.
• Wipe off any water droplets on the appliance socket.
1. Insert the appliance plug [
into appliance socket.
2. Plug the adaptor [ ] into a
B

household outlet.
• Check that the charge status lamp
( ) is glowing.
• Charging is completed after
approx. 1 hour.
3. Disconnect the adaptor after
charging is completed.
Note
You cannot operate the shaver while charging.
While charging
The charge status lamp ( )
glows.
]
B

2
1
After charging is completed
The charge status lamp ( )
turns off.
2018/6/19 11:47:34