Table of Contents
Advertisement
2. Press
when finished.
The shaving sensor lamp ( ) blinks.
When the battery capacity is low
The battery capacity lamp ( ) blinks when operating the
shaver. The appliance beeps twice after switched off.
• You can shave 2 to 3 times after the battery capacity lamp
( ) blinks. (This will differ depending on usage.)
Notes
• The appliance may not operate in an ambient temperature
lower than approximately 5 °C.
• The shaving sensor may not respond depending on the type
and quantity of the shaving gel. This is not abnormal.
• Depending on the beard thickness or the amount of beard
trimmings in the shaver head, the shaving sensor may not
react and the driving sound may not change. This is not
abnormal.
14
ES‑LL21
.indb 14
While using
• To prevent erroneous operation, place your
fingers on the thumb rest while using the
shaver.
• The sonic vibration cleaning mode is activated when the power
switch is pressed for more than 2 seconds while the shaver
is not operating (the switch lock is unlocked). (See page 17.)
You cannot shave in this mode.
Locking/unlocking the power switch
Locking the power switch
1. Press
once
2. Press
and then
more than 2
release.
seconds until the
• The shaver
switch lock lamp
starts
( ) turns on.
operating.
• The shaver will
stop operating.
Unlocking the power switch
1. Press
for more than
2 seconds until the switch
lock lamp ( ) turns off.
for
3. Release
.
• The switch
lock lamp ( )
will light up for
5 seconds and
turn off.
2. Once the shaver starts
operating, release
.
• The switch lock lamp ( )
will turn off.
2018/6/19 11:47:38
Hide quick links:
Advertisement
Table of Contents
