Cisco Catalyst 2960-L Series Hardware Installation Manual page 48

Installing the Cable Guard (Optional)
Step 2
Use the supplied number-10 pan-head screws to attach the cable guard to the switch.
Figure 33: Attaching the Cable Guard to the Switch
1
2
Step 3
Loosen the number-10 Phillips pan-head screws, slide the cable guide out, and pivot it upwards so that you can install
the cables.
Figure 34: Pivoting the Cable Guard Upwards
1
Step 4
Attach the cables to the switch.
Cisco Catalyst 2960-L Series 8-Port and 16-Port Switch Hardware Installation Guide
36
Switch
Cable Guard
Cable guard
3
2
Switch Installation
Two number-10 Phillips
pan-head screws
Pivot direction for cable
guard pivots