Connectors - ERNITEC MERCURY SX 5TH GENERATION User Manual

1.4

Connectors

The diagram below shows the default button and various connectors of the
camera. Definition for each connector is given as follows.
No.
1
2
3
4
5
6
*Please contact the manufacturer for the compatible BNC cable.
Connector
RJ-45
BNC*
Power
(DC 12V / AC 24V)
Default Button
microSD Card Slot
Alarm & Audio I/O
NOTE: It is not recommended to record with the microSD card for 24/7
continuously, as it may not be able to support long term continuous data
read/write. Please contact the manufacturer of the microSD card for
information regarding the reliability and life expectancy.
Pin Definition
- For network and PoE connections
1 GND
2 BNC
1 AC 24V 1
2 AC 24V 2
3 DC 12V 1
4 DC 12V 2
Press the default button with a proper tool for
-
at least 20 seconds to restore the camera.
Insert the microSD card into the card slot to
store videos and snapshots. Do not remove
-
the microSD card when the camera is powered
on.
1 Audio In L
2 Audio In R
3 GND
4 Audio Out L
5 Audio Out R
6 Alarm Out +
7 Alarm Out −
8 Alarm In +
9 Alarm In −
Remarks
For analog video output
Power connection
Audio In (Line In)
Ground connection
Audio Out (Line Out)
Alarm connection
**Do NOT connect external
power supply to the alarm I/O
connector of the IP camera.
5