Fanimation Windpointe MW75 Series Manual page 9

Assembling and Mounting the Fan Blades and Switch Hsg (continued)
5. Disassemble the cover-switch cup from the adapter-
switch cup by removing three screws.
(Figure 5)
6. Assemble the adapter-switch cup on the housing
support bracket using the previously removed screw
and tighten all three screws. (Figure 6)
7. Securely attach the 9-pins witch cup connector to
wiring harness socket within adapter assembly.
(Figure 7)
WARNING
The color label on these two connectors must correspond
to each other.
8. Assemble the cover-switch cup onto the assembled
adapter-switch cup with three screws. (Figure 8)
9. If air flow is desired in the opposite direction, turn the
fan off and wait for the blades to stop turning. Then slide
the reverse switch to the opposite position and turn fan
on again. (Figure 9)
Reverse Switch Information
Season Rotation Direction
Summer Counter-Clockwise
Winter Clockwise
Switch Position
Left
Right
9
Adapter-Switch Cup
Cover-Switch Cup
Figure 5
Figure 6
Figure 7
Figure 8
Reverse Switch
Figure 9
Adapter-Switch
Cup
Cover-Switch Cup