CONTENTS PRECAUTIONS PREFACE NAMES AND FUNCTIONS HOW TO ASSEMBLE THE KEYBOARD HOW TO ASSEMBLE THE TRAY OPERATIONS 1. General Weighing 2. Weighing with the Tare 3. Add up Sales 4. Calling the Added Total Price 5. Saving a PLU to Memory 6.
PRECAUTIONS Make sure that you plug your scale into the proper power outlet. Plug into a power outlet 10 minutes before operations. Place the scale on a flat and stable Do not subject the scale to sudden surface. temperature changes. Do not subject the scale to direct sunlight.
DISPLAY & KEYBOARD PREFACE Thank you for purchasing our CAS HS Series. These series have been designed with CAS reliability, under rigid quality control TOTAL PRICE and with outstanding performance. Your specialty departments can enjoy these high quality reliable CAS products.
KEYS FUNCTIONS HOW TO ASSEMBLE THE PLATTER Used to add a transaction. Insert the screw( ) into the hole( ), then connect to the tapping of the platter wire rod( ). Turns on and off the displays. Insert the screw( ) into the tapping of the platter wire rod( ), then connect to hole( ).
OPERATIONS 1. General Weighing Place the commodity on Remove the commodity Remove the container. the platter. from the platter. NOTE: The tare is cleared automatically after an each weighing. Not all the countries are applicable with this tare clear. Enter a unit price. Place the commodity Remove the commodity on the platter.
4. Calling the Added Total Price When you press the TTP-CALL key without using the add-up function, you will hear a beep sound. Confirm the added total price only. Remove the commodity Enter a another unit price. Place the commodity on from the platter.
5. Saving a PLU to Memory The PLU means Price Look Up and which has a unit price. This function stores each PLU into a internal back up memories. This scale has 1 memory of direct PLU and 199 memories of indirect PLUs. A) For Direct PLU Key Press MW key.
B) For Indirect PLUs 7.THE OPERATIONS CHOOSE THE Ib OR kg MODE WARNING : When you change the kg/Ib mode, avoid leaving any item or items on the platter. Ib mode : If you want to use this mode, please do the followings. Enter an address of the Press MR key.
Call your CAS dealer 3. Environment Conditions for non-automatic weighing instrument. Err 12 Condition codes are broken Call your CAS dealer for span calibration This product is intended to be “indoor use”. Err 13 Key codes are broken Call your CAS dealer for span calibration...
Need help?
Do you have a question about the HS-1 and is the answer not in the manual?
Questions and answers