Broadcom (Lsi) Megaraid 9361-8I Sas3; Pcie3.0 X8 With Cables (Fc Ekah And Ekeh) - IBM Power System S821LC Installing

Pure host bus adapter (HBA)
Supports 3.0 Gb/s, 6.0 Gb/s, and 12 Gb/s SAS and SATA data transfer rates
Cables
Attach any necessary cables to the add-on card.
Operating system or partition requirements
If you are installing a new feature, ensure that you have the software that is required to support the new
feature and that you determine whether any prerequisites must be met for this feature and attaching
devices. To check for the prerequisites, see IBM Prerequisite website (www-912.ibm.com/e_dir/
eServerPrereq.nsf).
The adapter is supported on the following versions of the operating systems:
Important: For a list of known Linux OS issues that may affect this adapter, see the IBM Power LC
readme (https://ibm.biz/BdrgTZ).
v Linux
– Red Hat Enterprise Linux 7.3, little-endian, for Power, or later
– Ubuntu 16.04.1, or later
– Ubuntu 14.04.5, or later
– For support details, see the Linux Alert website (www14.software.ibm.com/webapp/set2/sas/f/
lopdiags/info/LinuxAlerts.html).
– The latest version of the device driver or iprutils can be downloaded from the IBM Service and
Productivity Tools website(http://www14.software.ibm.com/webapp/set2/sas/f/lopdiags/
home.html).
– The latest version of enabling libraries and utilities may be downloaded from Fix
Central(http://www.ibm.com/support/fixcentral/).
Broadcom (LSI) MegaRAID 9361-8i SAS3 Controller with 8 internal ports (2 GB
Cache) PCIe3.0 x8 with cables (FC EKAH and EKEH)
Learn about the specifications and operating system requirements for feature code (FC) EKAH and EKEH
adapters.
Overview
FC EKAH and EKEH are both the same adapter with different feature codes. FC EKAH is only supported
on 8001-12C and does not include cables. FC EKEH, alternatively, is only supported on 8001-22C and
includes cables.
The Broadcom (LSI) MegaRAID 9361-8i SAS3 Controller with 8 internal ports (2 GB Cache) PCIe3.0 x8
with cables is a PCI Express (PCIe) generation 3 (Gen3) x8 adapter. The adapter can be used in either a x8
or x16 PCIe slot in the system. TThe adapter features 8 internal SAS connectors for high-performance
storage connectivity. This Redundant Array of Independent Disks (RAID) adapter is built on the LSI
Logic SAS IC and MegaRAID technology. It also supports high capacity storage applications using
high-performance RAID architecture, including hardware RAID 5 and 6.
Important: RAID mode is the adapter default and needs to be configured by the customer before drives
are shown to the OS for install. The adapter can be set up in JBOD (Just a Bunch of Disks) mode.
Installing and configuring the system
53